Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Concrete look in your bathroom or shower room? With the LAB Bathroom Coating system you can finish concrete ciré or cement-based plaster mortars waterproof. This LAB Bathroom Coating system is, as the name suggests, transparent and consists of two different products, namely: this LAB Bathroom Coating Primer Transparent and LAB Bathroom Coating Transparent .

It is important to read the product advice carefully before application!

LAB Bathroom Coating Primer Transparent

LAB Bathroom Coating Primer Transparent quickly seals highly absorbent surfaces and significantly improves the adhesion of the top coating. We do not recommend LAB Bathroom Coating Transparent on the floor of the wet cell.

Consumption: 6 to 12 m² per litre. The yield depends on the substrate, pretreatment, method of application, applied layer thickness, processing material and conditions.

How do you calculate the required amount? Measure the length and width of the surface you are going to treat. Multiply this by each other and then divide it by the consumption per kilo. Now you know how many kilos you need for 1 layer. For example: for a surface of 5 mx 2 m (10 m² : 9 m² = 1.1 kilos) you need 1.1 kilos of LAB Bathroom Coating Primer Transparent for 1 layer (calculated with a consumption of 9 m² per kilo). Please note! We always recommend applying two layers. You will notice that especially with absorbent surfaces your consumption for the first layer will be higher than for the second layer.

Photo 1 and 2: Bathroom coating Transparent over cement-based plaster mortar @jellinadetmar.

Photo 3 and 4: Bathroom coating Transparent over cement-based plaster mortar.