Vestingh FX Wall Fixer PLUS (for indoor and outdoor use)

Please note: screen colours may differ from the actual paint colours depending on screen settings. The incidence of light can also largely determine a colour on the wall and the atmosphere in the room.

Vestingh FX Wall Fixer Plus is a deep primer: good adhesion and has a penetrating capacity on porous and slightly absorbent surfaces. This product is applicable for both inside and outside . Use Vestingh FX Wall Fixer Plus on old lime paint layers that are not strong enough to allow a layer of paint to adhere. Also applicable to fix highly absorbent or powdery plastered or cement or gypsum plastered surfaces indoors and outdoors. Solvent-free, low-odour and alkali-resistant, water vapour permeable and can be painted over with Vestingh and LAB wall paints.

Prevent leaking streaks and drip formation. These can remain visible. Therefore, start at the bottom of the wall and work upwards. The substrate must be fully cured, load-bearing and dry. Moisture percentage max. 4%. Moisture percentage of gypsum-based substrates max. 1%.

Application: Use this product undiluted and apply with a roller or block brush.

Drying time: approx. 20 minutes.

Consumption of this product:
10-12 m² / liter based on average consumption.

How do you calculate the required amount of fixative?
Measure the length and height of the wall, multiply them together and then divide by 10. You have now calculated the number of litres you need for one layer of fixative.

For example: for a wall of 10 mx 2 m (20 m² : 10 = 2) you need 2 liters of Vestingh FX Wall Fixer Plus for 1 layer of fixative.