LAB cementum (concrete look)

WALL PAINT

LAB CEMENTUM

LAB cementum is an easy-to-apply system that lets you create a concrete effect indoors. It can be applied to both walls and tiles. The result is raw, lively, and atmospheric. You choose the look: from a fine, subtle texture to a coarse, robust finish. This way, you can give any room an industrial look.

Would you like to learn more about applying LAB cementum? Watch the HOW TO LAB video.

WATCH THE INSTRUCTIONAL VIDEO

Before you begin

EASY TO READ

PRODUCT INFORMATION SHEET

SAFETY DATA SHEET

WALLS WITH CHARACTER

Not a bare wall, but a wall with a story. LAB cementum gives your interior the raw charm of concrete: vibrant, atmospheric, and authentic. The way you spread the cementum determines how rough or smooth the end result will be.

MORE INSPIRATION

CONCRETE EFFECT

A vibrant concrete look on your wall or tiles.

EVERYONE CAN DO IT

Easy to apply and follow the steps for the best results.

DETERMINE THE LOOK

Which movement you use is up to you. From fine and subtle to coarse and robust.

Need help?

FREQUENTLY ASKED QUESTIONS

LAB CEMENTUM

What is LAB cementum (concrete look), and where can I use it?

LAB cementum (concrete look) is an easy-to-apply wall system that makes it simple to create a concrete effect. Easy to apply and extremely durable. It can be mixed to match almost all unique LAB colours and, on request, virtually any other colour. LAB cementum can be used on many different types of surfaces and in various places around the home. For example, it can be used behind the kitchen counter and in the bathroom. Is your room and/or surface not listed? Email contact@labcolourtheworld.com for tailored advice.

Are there also sample pots with LAB cementum?

No sample pots are available for LAB cementum (concrete look) . All our sample pots contain LAB wall paint. This paint serves as a base for testing all LAB paint types and special finishes. These samples come very close to the actual colours. You can find sample pots in all LAB colours here.

Would you like to see and feel the effect of LAB cementum first? Then order a colour sample with a LAB cementum finish. Available in 11 colours.

How do I apply LAB cementum (concrete-look finish)?

LAB cementum (concrete look) can be ordered in packages of 5 m2, 10 m2, and 25m2. This includes one coat of LAB cementum 1 (primer) and two coats of LAB cementum 2 (based on average coverage). Optionally, you can choose to apply LAB cementum 3 (concrete-look coating) as a topcoat. This coating makes the surface completely waterproof, making LAB cementum suitable for bathrooms (including wet-room walls), toilets, kitchens, and other heavily used walls.

Can I apply LAB cement (concrete-look) over floor tiles?

That’s possible!

The procedure is as follows:

Cut out any silicone sealant completely. This must be done very thoroughly;
Thoroughly degrease the floor with LAB cleaner;
Rinse with water;
Sand the floor using the prescribed method. This depends on the substrate;
Make sure the surface is completely dust-free;
Apply one coat of LAB cementum 1 (primer). Pay extra attention to the joints, as these are often porous;
Apply one coat of LAB cementum 2 and check whether the joint has been filled/leveled sufficiently. If not, repeat this step;
Then finish the surface with one coat of LAB cementum 2.
Optional for an extra wear-resistant finish: apply two coats of LAB cementum 3 (concrete-look coating).

More information?

You can find the frequently asked questions about LAB cementum here.